A Cooling Tower is a heat rejection device, which extracts waste heat to the atmosphere though the cooling of a water stream to a lower temperature. The type of heat rejection in a cooling tower is termed “evaporative” in that it allows a small portion of the water being cooled to evaporate into a moving air stream to provide significant cooling to the rest of that water stream. The heat from the water stream transferred to the air stream raises the air’s temperature and its relative humidity to 100%, and this air is discharged to the atmosphere. Evaporative heat rejection devices such as cooling towers are commonly used to provide significantly lower water temperatures than achievable with “air cooled” or “dry” heat rejection devices, like the radiator in a car, thereby achieving more cost-effective and energy efficient operation of systems in need of cooling. Think of the times you’ve seen something hot be rapidly cooled by putting water on it, which evaporates, cooling rapidly, such as an overheated car radiator. The cooling potential of a wet surface is much better than a dry one.
Why do Cooling Towers require internal surface reline, relining & refurbishment works?
The internal surfaces of a cooling tower over time will start to deteriorate due to general operational use, or in this particular example below the internal surfaces could be damaged due to excessive volumes of chemical dosing by a previous poor quality Water Treatment Service Provider.
If you have any concerns about your Cooling Tower or would like to discuss a Cooling Tower Reline please feel free to contact a member of our team at today on Tel:01704 335801.
Click the button below to start your quotation.Get a Quote
LEGIONELLA RISK ASSESSMENTS & LEGIONELLA REMEDIAL WORKS FOR FACILITIES MANAGERS
TANK RELINE 10 YEAR GUARANTEE
TANK RELINE APPOINT A NEW MANAGING DIRECTOR
STEPS TAKEN WHEN RELINING A WATER TANK
TOP 5 REASONS TO RELINE A WATER TANK
Tank Reline completed a project for us recently. They were very professional, organised and most importantly in today’s climate very competitively priced. From start to finish the project ran perfectly and they always recommend relining tanks over a full replacement, I would use Tank Reline every time. Also we and our client were very impressed with the photographic reports produced and thought this was a good touch to a great job.
Luke Tanton, Stonegrove Limited
Tank Reline are certified members of the LCA, which means our management systems are specially designed to assist our clients in controlling their Legionella risk. We are also accredited to the highest standards for Health & Safety, Quality & Environment. See below for a selection of the organisations with whom our company and staff are certified.